Icom IC-A210 Instruction Manual - Page 12

2 BASIC OPERATION I Direct frequency setting mode operation The direct frequency setting mode operation is useful when setting the desired frequency directly to the active frequency indicator. q Push and hold [↔] for 2 sec. to enter the direct frequency setting mode. • The only active frequency is displayed. RX 121.80 w Select an operating frequency. • Refer to pgs. 5-6 in details. e Push [RCL] or [↔] to exit the direct frequency setting mode. I Dualwatch operation The dualwatch operation monitors active and standby frequencies alternately. Therefore, it's useful to monitor the standby frequency while receiving the active frequency. q Push [DUAL] to enter dualwatch operation. • "DUAL" appears on the active frequency indicator. • The active or standby frequency's "RX"blinks when receiving signal or opening the squelch. RX DUAL RX 121.00 129.405 w Push [DUAL] again to exit dualwatch operation. • "DUAL" disappears. • You may also exit dualwatch by pushing [PTT]. 8