Icom IC-A210 Instruction Manual - Page 6
Front panel Continued
View all Icom IC-A210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
1 PANEL DESCRIPTION I Front panel (Continued) qwe rt DUAL EC VOL OFF PUSH TEST RX MEMORY 118.00 121.525 CH09 SAMPLE iA210 yu RCL MEM io COMM t MEMORY SWITCH [MEM] ➥ Push and hold for 2 sec. to be programmed a displayed frequency to any blank regular memory channel or delete/revive the selected memory channel (depending on the operating mode) (p. 9). ➥ Push to display the memory mode menu, and operate selected menu (p. 9). i INNER (Small) TUNING DIAL [DIAL] ➥ Rotate to set the standby frequencies (kHz digit) (p. 5), memory channels (p. 10), MENU mode conditions (p. 22), etc. ➥ Push and hold for 2 sec. to turn the dial/panel lock function ON (p. 19). y RECALL SWITCH [RCL] ➥ Push to enter/exit the memory mode (p. 9). ➥Push and hold for 2 sec. to enter the menu mode (p. 22). o OUTER (Large) TUNING DIAL [O-DIAL] ➥ Rotate to set the standby frequencies (MHz digit) (p. 5), group memory channel (p. 13), cursor position (p. 15), etc. ➥ Rotate to change the scan direction while scanning u LIGHT-SENSITIVE DETECTOR (p. 21). This detector senses ambient light. The detector is used to adjust "Dimmer brightness (Low/High)" (p. 25) automat- ically when "Dimmer Mode" (p. 25) sets to 'AUTO.' 2