Icom IC-A210 Instruction Manual - Page 3

PRECAUTIONS R WARNING! NEVER operate the transceiver with a headset or other audio accessories at high volume levels. Hearing experts advise against continuous high volume operation. If you experience a ringing in your ears, reduce the volume level or discontinue use. NEVER connect the transceiver to an AC outlet or to a power source of more than 28 V DC. Such a connection will damage the transceiver. DO NOT push the PTT when not actually desiring to trans- mit. AVOID using or placing the transceiver in direct sunlight or in areas with temperatures below -20°C (-4°F) or above +55°C (+131°F). AVOID placing the transceiver in excessively dusty envi- ronments. NEVER connect the transceiver to a power source that is AVOID placing the transceiver against walls. This will ob- DC fused at more than 5 A. Accidental reverse connection will struct heat dissipation. be protected by this fuse, higher fuse values will not give any protection against such accidents and the transceiver will be AVOID the use of chemical agents such as benzine or al- ruined. cohol when cleaning, as they damage the transceiver sur- faces. DO NOT operate the transceiver near unshielded electrical blasting caps or in an explosive atmosphere. BE CAREFUL! The transceiver will become hot when DO NOT connect the transceiver to a power source using operating continuously for long periods. reverse polarity. This connection will not only blow fuses but also may damage the transceiver. FCC caution: Changes or modifications to this transceiver, not DO NOT place unit in a non-secure place to avoid inad- vertent use by children. expressly approved by Icom Inc., could void your authority to operate this transceiver under FCC regulations. ii