Icom IC-A210 Instruction Manual - Page 17

MEMORY OPERATION 3 I Regular memory channel The transceiver has 10 regular memory channels. 5 actions are selectable. q Push [RCL] to enter the memory mode. • The channel number appears. • The memory channel name also appears if it has been entered. w Rotate [O-DIAL] to select the regular memory channel. RX MEMORY 122.00 127.005 CH01 • "MEMORY" appears. e Push [MEM] again, then rotate [O-DIAL] to select a menu as follow. • The memory channel number blinks. REPLACE Replace to the standby frequency. DELETE Delete the memory channel. REVIVE Revive the previous memory channel data. CH NAME Edit the memory channel name. DONE Do nothing and return to the memory mode. r Push [MEM] to perform the selected action. I Group memory channel The transceiver has 200 memory channels 200 group channels (10 channels × 20 groups). 6 actions are selectable. q Push [RCL] to enter the memory mode. • The channel number appears. • The memory channel name also appears if it has been entered. w Rotate [O-DIAL] to select the group memory channel. • "GRP01-GRP20" appears. RX GRP01 122.00 127.005 CH01 e Push [DIAL], and then rotate [O-DIAL] to select the mem- ory group from GRP01 to GRP20 if necessary. • The group and channel numbers blink. • Push [DIAL] again, or push [RCL] to set the memory group. r Push [MEM] again, rotate [O-DIAL] to select a menu as follow. • The memory channel number blinks. REPLACE Replace to the standby frequency. DELETE Delete the memory channel. REVIVE Revive the previous memory channel data. GRP NAME Edit the group name. CH TAG Set the memory channel as a tag channel. DONE Do nothing and return to the memory mode. t Push [MEM] to perform the selected action. 03 13