Icom IC-A210 Instruction Manual - Page 18

3 MEMORY OPERATION I History memory channel The transceiver has 10 history memory channels. The standby frequency is stored into a history memory channel when pushing [↔]. The frequency is stored into the history memory channel in order from "CH01" to "CH10." q Push [RCL] to enter the memory mode. • The channel number appears. • The memory channel name also appears if it has been entered. w Rotate [O-DIAL] to select the history memory channel. • "HISTORY" appears. RX HISTORY 122.00 127.005 CH01 e Rotate [DIAL] to select a desired channel. • Push [↔] to exchange the history memory channel frequency to the active frequency if necessary. r Push [RCL] to exit the memory mode. I Clearing the memory contents (Regular and group memory channels only) Unwanted memory channels can be cleared. q Push [RCL] to select memory mode. • The channel number appears. • The memory channel name also appears if it has been entered. w Rotate [O-DIAL] to select the memory channel type. • Select from regular memory channel or group memory channel. e Push [MEM] again, then rotate [O-DIAL] to select "DELETE." • The memory channel number blinks. RX 122.00 MEMORY 127.000 ÅDELETE Ç 127.000 CH01 r Push [MEM] to delete the memory channel data appears momentarily, then the next selectable channel appears. RX MEMORY 122.00 CH01 t Push [RCL] to exit the memory mode. 14