Icom IC-M330 Instruction Manual english - Page 21
BASIC OPERATION, Selecting a channel
View all Icom IC-M330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
4 BASIC OPERATION ■■Selecting a channel DDRegular Channel You can select a channel by pushing [▲] or [▼]. DDChannel 16 Channel 16 is the distress and safety channel. It is used to establish the initial contact with a station, and for emergency communications. Channel 16 is monitored during both Dualwatch and Tri-watch. While in the standby mode, you must monitor Channel 16. zzPush [16/C] to select Channel 16. LLTo return to the previously selected channel, push [◄] or [►] to display CHAN or CH/WX , then push the software key below CHAN or CH/WX . 1 DDCall channel Each Channel Group has separate leisure-use Call 2 3 channels. The Call channel is scanned during Tri-watch. The 4 Call channels can be selected and used to store your most often used channels in each Channel Group, for quick recall. 5 LLSee page 12 for details on setting the Call channel. 6 zzHold down [16/C] for 1 second to select the Call channel. 7 ••The Call channel number and "CALL" are displayed. 8 9 10 LLTo return to the previously selected channel, push [◄] or [►] to 11 display CHAN or CH/WX , then push the software key below CHAN or CH/WX . 12 13 14 15 16 9