Icom IC-M330 Instruction Manual english - Page 43
Sending a Position Reply call, LCALL LCALL
View all Icom IC-M330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
6. Push CALL to send the Position Request call. ••"Transmitting Position Request" is displayed, and then the assigned channel is automatically selected. LLIf Channel 70 is busy, the transceiver stands by until the channel becomes clear. 7. When you receive a Position Reply: ••An alarm sounds. ••The screen to the right is displayed. 8. Push ALARM OFF to turn OFF the alarm. 9. Push CLOSE . ••The received information is displayed. 10. Push [▲] or [▼] to scroll the screen then check the targetʼs position. 11. Push STBY , and then OK to return to the operating screen. DSC OPERATION 7 DDSending a Position Reply call 1 Send a Position Reply call when a Position Request call is received. If the Auto ACK function is set to "Auto," the 2 Acknowledgement is automatically sent to the calling 3 station. (p. 42) 4 1. While a Position Request call is being received, push ALARM OFF to 5 turn OFF the alarm. 6 2. Push ACPT . ••The received call's information is 7 displayed. 8 3. Push ABLE to send an "Able to Comply" Acknowledgement, or push 9 UNABLE to send an "Unable to Comply" Acknowledgement. 10 LLIf no valid GPS position is received, 11 you can manually enter the position and time in "Position" item on this 12 screen. See "Entering the position and time" on page 20 for details. 13 4. Push CALL to send the Position Reply 14 call. 15 16 5. Push STBY , and then OK to return to the operating screen. 31