Icom IC-M330 Instruction Manual english - Page 25
Receiving and transmitting, Microphone Lock function
View all Icom IC-M330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
BASIC OPERATION 4 ■■Receiving and transmitting CAUTION: DO NOT transmit without an antenna. 1. Push [▲] or [▼] to select the channel to call on. ••The channel number and name are briefly displayed. (Only when "CH Close-up" is ON.) LLYou cannot transmit on Channel 70. L L is displayed while receiving a signal. LLYou can also select the channel with [▲] or [▼] on the microphone. (Only when "FAV on MIC" is OFF.) 2. Hold down [PTT] on the microphone to transmit. • • is displayed while transmitting. 3. Release [PTT] to receive. Hold down to transmit. Release to receive. Select a channel. Speak to the Microphone. TIP: To maximize the readability of your transmitted signal, pause for a second after holding down [PTT] and hold the microphone 5 to 10 cm (2 to 4 inches) from your mouth, and then speak at your normal voice level. 1 2 NOTE: ••The Time-out Timer function cuts OFF transmission 3 after 5 minutes of continuously transmitting, to prevent 4 prolonged transmission. 5 6 ■■Microphone Lock function 7 The Lock function electronically locks all keys on the 8 microphone except [PTT] to prevent accidental channel changes or functions access. 9 1. Hold down [DIAL] for 1 second to turn OFF the 10 transceiver. 2. While holding down [HI/LO] on the microphone, hold 11 down [DIAL] for 1 second to turn the Lock function ON 12 or OFF. 13 14 15 [HI/LO] [16/C] 16 [▲]/[▼] 13