Icom IC-M330 Instruction Manual english - Page 42
Sending a Test Acknowledgement, Sending a Position Request call/Polling, Request call
View all Icom IC-M330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
7 DSC OPERATION DDSending a Test Acknowledgement By default, when you receive a Test call, the Auto ACK function automatically sends an Acknowledgement to the calling station (p. 42). If the function is set to "Manual," do the following steps to send an Acknowledgement. 1. After a Test call is being received, push ALARM OFF to turn OFF the alarm. 2. Push ACPT . ••The received call's information is displayed. 3. Push ACK . ••The "Test ACK" confirmation screen is displayed. 4. Push CALL to send the Acknowledgement. ••"Transmitting Test ACK" is displayed. 5. Push STBY . ••A confirmation screen is displayed. 6. Push OK to return to the operating screen. DDSending a Position Request call/Polling Request call (For only the USA version) You can send a Position Request call or Polling request call to a station, depending on the presetting. (Example: Sending a Position Request call) 1. Push OTHER DSC . ••The "OTHER DSC" screen is displayed. LLYou can also display the "OTHER DSC" screen by selecting the "Other DSC" item on the Menu screen. 2. Select "Type," and then push [ENT]. ••The "MESSAGE TYPE" screen is displayed. 3. Select "Position," and then push [ENT]. ••The message type is selected, and returns to the "OTHER DSC" screen. LLWhen you send a Polling Request call, select "Polling." 4. Select "Address," and then push [ENT]. ••The "ADDRESS" screen is displayed. 5. Select a target to send a Position Request call to, and the push [ENT]. LLYou can also select "Manual Input" to manually enter the target ID. 30