Icom IC-M330 Instruction Manual english - Page 52
Multiple-task mode, Holding a DSC task
![]() |
View all Icom IC-M330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
7 DSC OPERATION ■■Multiple-task mode (For only the USA version, depending on the presetting.) If the Multiple-task function is enabled, the transceiver can hold up to 7 tasks. Therefore, you can handle more than 2 DSC tasks simultaneously by switching between the DSC tasks. To use the Multiple-task mode, select "Multiple" in the "Procedure" on the Menu screen. (p.44) Menu > DSC Settings > Procedure When the Multiple-task mode is activated, TASK is displayed on the operating screen. NOTE: The Task mode has a Time-out Timer (TOT) function. After a certain period of time has passed without any operation on a task, the transceiver automatically exits the Task mode and returns to the operating screen. When a Time-out Timer activates, an alarm sounds and a count down message is displayed for 10 seconds. DDHolding a DSC task In the Multiple-task mode, you can hold or activate the DSC task as follows. Example: When a Group call is received: 1. Push ALARM OFF to turn OFF the alarm. ••The received call's information is displayed. 2. Push HOLD . ••The received Group call task is held into the task list and returns to the operating screen. 40
![](/manual_guide/products/icom-icm330g-instruction-manual-english-9eb3e03/52.png)