Icom IC-M330 Instruction Manual english - Page 65
CONNECTIONS AND MAINTENANCE, Connections
View all Icom IC-M330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
9 CONNECTIONS AND MAINTENANCE ■■Connections q w e y r t 1 NMEA IN/OUT LEADS Green: Listener B (Data-L), GPS In (-) Yellow: Listener A (Data-H), GPS In (+) Connect to the NMEA output lines of a GPS receiver for position data. ••NMEA 0183 (ver. 2.0 or later) sentence format RMC, GGA, GNS, or GLL and VTG compatible GPS receiver is required. Ask your dealer about suitable GPS receivers. ••The GPS sentences input from this connector are given priority to over the sentences input from the GPS antenna connector. Brown: Talker B (Data-L), Data Out (-) White: Talker A (Data-H), Data Out (+) Connect to NMEA 0183 input lines of navigation equipment, to receive position data from other ships. ••An NMEA 0183 (ver. 2.0 or later) sentence format DSC or DSE compatible navigation equipment is required. ••The supplied GPS outputs RMC, GSA, and GSV format sentences. 1 2 AF OUT AND DATA LEADS 2 Blue: External Speaker (+) 3 Black: External Speaker (-) Connects to an external speaker. 4 Orange: Data line 5 Gray: Data line 6 Used only for maintenance purpose. NOTE for NMEA In/Out and AF Out leads: 7 The connectors are attached to keep the leads together. 8 Before connecting to a piece of equipment, cut the leads to remove the connector. 9 10 3 DC POWER CONNECTOR Connects to a 13.8 V DC power source. 11 (+: Red, -: Black) 12 CAUTION: After connecting the DC power cable, 13 NMEA leads or external speaker leads, cover the connector and leads with a vulcanizing tape, as shown 14 below, to prevent water seeping into the connection. 15 Rubber vulcanizing tape 16 53