Icom IC-M330 Instruction Manual english - Page 62
Radio Settings, Scan Type, Dual/Tri-watch
![]() |
View all Icom IC-M330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
8 MENU SCREEN GPS Selects a satellite to be used for GPS (Global Positioning System) to pinpoint the geographic location of your transceiver anywhere in the world. This setting may not be usable, depending on the transceiver version or presetting. ••GPS (Always On) The GPS (Global Positioning System) is permanently set to ON. ••GLONASS (Default: On) Selects whether or not to use the data from the GLONASS (GLObal'naya NAvigatsionnaya Sputnikovaya Sistema) satellites. ••SBAS (Default: Off) Turns the SBAS (Satellite Based Augmentation System) function ON or OFF. When turning ON this function, the GPS position accuracy can be improved. 50 DDRadio Settings Scan Type (Default: -) Selects the scan type. The default setting differs, depending on the transceiver version. LLSee page 15 for details. Normal Scan: S cans all Favorite channels in the selected channel group. Priority Scan: S equentially scans all Favorite channels, while monitoring Channel 16. Scan Timer (Default: Off) You can use the Scan Timer to pause, or to resume after 5 seconds, when a signal is detected. On: When a signal is detected on a channel, the scan pauses for 5 seconds, and then resumes. If the signal disappears in less than 5 seconds, the scan immediately resumes. Off: When a signal is detected on a channel, the scan pauses until the signal disappears, and then resumes. Dual/Tri-watch (Default: Dualwatch) Select Dualwatch or Tri-watch. Dualwatch: Monitors Channel 16 while receiving on another channel. Tri-watch: Monitors Channel 16 and the Call channel while receiving on another channel. LLSee page 17 for details.
![](/manual_guide/products/icom-icm330g-instruction-manual-english-9eb3e03/62.png)