Icom IC-M330 Instruction Manual english - Page 28
Setting Favorite channels, Starting a scan
View all Icom IC-M330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
5 SCAN OPERATION (Except for the Dutch Version) ■■Setting Favorite channels You can quickly recall often-used channels by setting them as Favorite channels. You can set Favorite channels in each Channel Group. 1. Select a Channel Group on the Menu screen. (p. 10) 2. Push [▲] or [▼] to select the channel. 3. Push [◄] or [►] to display . 4. Push . ••The selected channel is set as a Favorite channel, and " " is displayed. LLTo cancel the setting, push again. TIP: You can set all channels as Favorite channels, clear all settings, or reset to the default. By default, some channels are preset as Favorite channels. The preset channels differ, depending on the transceiver version. Example: Starting a Normal Scan. ■■Starting a scan 1. Select a Channel Group on the Menu screen. (p. 10) 2. Push [◄] or [►] to display SCAN . 3. Push SCAN . ••The scan starts. ••" " is displayed during a Normal Scan, and " " is displayed during a Priority Scan. ••" " and " " are displayed when a signal is received. LLWhen a signal is received, the scan pauses until it disappears, or resumes after 5 seconds, depending on the Scan Timer setting in "Radio Settings." LLA beep sounds and "16" blinks when a signal is received on Channel 16 during a Priority scan. 4. To stop the scan, push SCAN . TIP: To properly receive signals, be sure to adjust the squelch to a suitable level. 16