Icom IC-M330 Instruction Manual english - Page 48
Receiving a Position Request call, Ignore, Able to Comply, Accept
View all Icom IC-M330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
7 DSC OPERATION DDReceiving a Position Request call (For only the USA version, depending on the presetting) When a Position Request call is received: ••The alarm sounds for 2 minutes. ••"RCVD POS Request" is displayed. 1. Push ALARM OFF to turn OFF the alarm. 2. Push the software key below the intended operation. IGN (Ignore) ••Ignores the call and returns to the operating screen. ••The call is saved in the DSC Log. ••" " blinks continuously until you display the call message. ABLE (Able to Comply) ••Sends the Acknowledgement "Able to Comply." ••The call is saved in the DSC Log. UNABLE (Unable to Comply) ••Sends the Acknowledgement "Unable to Comply." ••Displays the Acknowledgement information, and then returns to the operating screen by pushing EXIT . ••The call is saved in the DSC Log. ACPT (Accept) ••Accepts the call. ••Displays the received call's information. ••The call is saved in the DSC Log. ••Push ABLE or UNABLE , then push CALL to send the Position Reply call. (p. 31) NOTE: ••If the Auto ACK function is set to "Auto," the Position Reply is automatically sent to the calling station. (p. 42) ••However, even if the Auto ACK function is set to "Manual," after receiving a Distress Acknowledgement, or while in the Distress Cancel call procedure, the Position Reply is automatically sent to the calling station. 36