Icom IC-M330 Instruction Manual english - Page 69
MBF-5 installation
View all Icom IC-M330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
9 CONNECTIONS AND MAINTENANCE ■■MBF-5 installation An optional MBF-5 flush mount kit is available for mounting the transceiver to a flat surface (less than 20 mm thick), such as an instrument panel. KEEP the transceiver and microphone at least 1 meter away from your vessel's magnetic navigation compass. 1. Using the template on page 63, carefully cut a hole into the instrument panel, or wherever you plan to mount the transceiver. (Torque: 2 N•m) 2. Slide the transceiver through the hole, as shown below. 3. Attach the 2 bolts (5 × 8 mm) and spacer supplied with the MBF-5 on both sides of the transceiver. 1 4. Attach the clamps on both sides of the transceiver. 2 LLMake sure that the clamps align parallel to the 3 transceiver body. 4 5 6 7 8 Clamp 9 10 5. Tighten the end bolts on the clamps (rotate clockwise) 11 so that the clamps press firmly against the inside of the instrument control panel. 12 6. Tighten the locking nuts (rotate counterclockwise) so 13 that the transceiver is securely mounted in position, as shown below. (Torque: 2 N•m) 14 7. Connect the antenna and power cable, then return the 15 instrument control panel to its original place. 16 Locking nut End bolt 57