Icom IC-M330 Instruction Manual english - Page 26

4 BASIC OPERATION ■■AquaQuake Water Draining function Water in the speaker grill may muffle the sound coming from the speaker. The AquaQuake Water Draining function removes water from the speaker grill by vibrating the speaker cone. CAUTION: DO NOT use the AquaQuake Water Draining function when an external speaker is connected. 1. Push [◄] or [►] to display AQUA . 2. Hold down AQUA to turn ON the function. ••A low frequency vibration beep sounds to drain the water, regardless of the volume level setting. LLThis function is activated for a maximum of 10 seconds, even if you continue to hold down AQUA . 3. Release the key to turn OFF the function. 14 ■■Editing a channel name You can edit the name of each operating channel and weather channel, using numbers, uppercase letters, symbols, and a space. This enables easy recognition of the channels or stations. All VHF marine channels are set with default names. 1. Push [▲] or [▼] to select the channel to edit. 2. Push [◄] or [►] to display NAME . LLYou cannot edit a channel name during Dualwatch, Tri-watch, or a scan. 3. Push NAME . ••The "CHANNEL NAME" screen is displayed. 4. Edit the channel name. TIP: ••Select !$? to enter symbols, and select 123 to enter numbers and letters. ••Select characters or a space using Select "◄" or "►" to scroll. ••Push [ENT] to enter the selected character. ••Select "←" or "→," or rotate [DIAL] to move the cursor. ••Push EXIT to cancel editing. 5. Push FIN to save the edited name and return to the operating screen.