Icom IC-V3500 Advanced Manual - Page 11
Hz tone (Using the HM-133V), Using the HM-133V, To send a 1750 Hz tone for 1 second
![]() |
View all Icom IC-V3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
2. REPEATER OPERATION Accessing a repeater Using the HM-133V 1. Set the receive frequency (repeater output frequency). 2. Set the frequency offset in the Set mode. 3. Push [DUP- 7 TONE] or [DUP+ 8 TSQL ] to select the minus Duplex or the plus Duplex mode. ••A "+" or "-" is displayed. 4. Push [FUNC] then [DUP- 7 TONE] to turn ON the subaudible tone encoder, depending on the repeater requirements. ••" " is displayed. LLThe 88.5 Hz tone frequency is set as the default. When a different tone frequency is needed to access a repeater, see page 2-6 for setting the tone frequency. 5. Hold down [PTT] to transmit. ••The displayed frequency is automatically changed to the transmit frequency. ••When "OFF" is displayed, confirm that the frequency offset is correctly set. (p. 8-2) 6. Release [PTT] to receive. 7. Push [MONI 1 ANM] to check whether or not you can directly receive the signal from the other station. LLThe transmit frequency is displayed. 8. Push [SIMP 9 TSQL] to return to the Simplex mode. ••A "+" or "-" disappears. 9. To turn OFF the subaudible tone encoder, push [FUNC], and then [ENT C T-OFF]. DD1750 Hz tone (Using the HM-133V) A 1750 Hz tone is required to access many European Repeaters. To send a 1750 Hz tone for 1 second zz Push [FUNC], and then [VOL▼ TONE-1]. To continuously send a 1750 Hz tone zz Push [FUNC], and then hold down [VOL▲ 0 TONE-2]. LLRelease [VOL▲ 0 TONE-2] to stop the transmission. 2-3 Push or to select the plus Duplex or the minus Duplex mode. Push , and then to turn ON the subaudible tone encoder. Push return to the Simplex mode. Push , and then or hold down .
![](/manual_guide/products/icom-icv3500-advanced-manual-63f83c3/11.png)