Icom IC-V3500 Advanced Manual - Page 67

8-3

8.

SET MODES

Set mode items

Tuning step

(Default: Depending on the version)

Sets the VFO tuning step to 5, 6�25, 10, 12�5, 15, 20,

25, 30, or 50 kHz�

LOCK

S

E

T

ANM

MONI

DIGITAL PRIO AO BUSY

MUTE

NAR

MID

LOW

Scan Stop timer

(Default: 10)

Selects the Scan Stop timer� When receiving a signal,

the scan pauses for this set period of time�

•

2 ~ 20:

When a signal is received, the scan pauses

for 2 ~ 20 seconds (in 2 second steps)�

• HO:

The scan pauses on a received signal until

the signal disappears�

LOCK

S

E

T

ANM

MONI


MUTE

NAR

MID

LOW

Scan Resume timer

(Default: 2)

Selects the Scan Resume Timer� When a received

signal disappears, the scan resumes for this set

period of time�

• 0:

The scan resumes immediately after the

signal disappears�

•

1 ~ 5:

The scan resumes 1 ~ 5 seconds after the

signal disappears�

• HO:

The scan remains paused for the “SCP”

(Scan Stop timer) setting, even if the signal

disappears�

NOTE:

Rotate [DIAL] to resume the scan�

LOCK

S

E

T

ANM

MONI


MUTE

NAR

MID

LOW

Display dimmer

(Default: 4)

Sets the backlight brightness level to between 1 (Dark)

and 4 (Bright)�

LOCK

S

E

T

ANM

MONI


MUTE

NAR

MID

LOW

Auto dimmer

(Default: ATD OF)

Sets the Auto Dimmer brightness�

The Auto Dimmer function automatically reduces the

backlight brightness�

•

ATD OF:

Turns OFF the function�

The display backlight is continuously

turned ON while the transceiver is

turned ON�

•

AT OF:

The display backlight is automatically

turned ON when operating the

transceiver� The backlight is

automatically turned OFF when no

operation has been performed for 5

seconds�

•

AT D1 to D3:

The display backlight is automatically

turned ON when operating

the transceiver� The backlight

automatically returns to the D1 ~ D3

set level when no operation has been

performed for 5 seconds�

LOCK

S

E

T

ANM

MONI


MUTE

NAR

MID

LOW

Display contrast

(Default: 2)

Sets the LCD contrast to between 1 (lowest contrast)

and 4 (highest contrast)�

LOCK

S

E

T

ANM

MONI

PRIO AO BUSY

MUTE

NAR

MID

LOW

Transmit permission

(Default: ON)

Turns the TX Inhibit function ON or OFF�

• OF:

Turns OFF the function�

• ON:

Transmit is inhibited�

L

This function can be independently set for each Memory

channel, Call channel, and the VFO mode�

LOCK

S

E

T

ANM

MONI

PRIO AO BUSY

MUTE

NAR

MID

LOW

LOCK

S

E

T

ANM

MONI

PRIO AO BUSY

MUTE

NAR

MID

LOW

Section	Page
ADVANCED OPERATIONS	4
Emergency Call function	5
Assigning the Emergency Call function to [BANK OPT]	5
Setting the Emergency frequency	5
Setting the Emergency alert volume	5
Using the Emergency Call function	6
Receiving an Emergency signal	7
Temporary Volume function	8
Assigning the Temporary Volume function to [BANK OPT]	8
Setting the Temporary Volume	8
Using the Temporary Volume function	8
REPEATER OPERATION	9
FM Repeater operation	10
Accessing a repeater	10
1750 Hz tone (Using the HM-133V)	11
Frequency Offset	12
Repeater Lockout	12
Reversed Duplex function	13
Auto Repeater function	13
Setting the Auto Repeater function ON/OFF	13
Frequency range and offset direction	13
Subaudible tones	14
Tone information	14
MEMORY OPERATION	15
General description	16
Memory channel contents	16
Selecting a Memory channel	17
Using the tuning dial	17
Using [▲] or [▼] on the HM-133V	17
Using the keypad on the HM-133V	17
Selecting a Call channel	18
Entering a Memory/Call channel	18
Copying the Memory channel contents	20
Memory/Call channel to VFO	20
Memory/Call channel to Call/Memory channel	21
Entering a channel name	22
Deleting a Memory channel	24
Setting a Memory Bank	25
Selecting a Memory Bank	27
Transferring a Memory channel to another bank	28
Deleting a Memory Bank	30
SCAN OPERATION	32
About scans	33
VFO scan	33
Memory scan	33
Memory Bank scan	33
[DIAL] operation during a scan	34
Squelch setting for a scan	34
Tuning step for a VFO scan	34
Skip function	34
When a signal is received	34
VFO scan	35
Memory scan	36
Memory Bank scan	37
Bank scan	37
Bank Link scan	39
Entering Scan Edges	41
Setting a Skip channel	42
PRIORITY WATCH	43
About the Priority watch	44
VFO frequency and a Memory/Call channel	45
VFO frequency and a Memory scan	46
VFO frequency and a Memory Bank scan	47
Bank scan	47
Bank Link scan	49
DTMF MEMORY	51
Entering a DTMF code	52
Transmitting a DTMF code	54
Automatic DTMF Memory transmission	54
Manual DTMF Memory transmission (Using the HM-133V microphone)	55
Manual DTMF code transmission (Using the HM-133V microphone)	55
Selecting the DTMF transmit speed	56
TONE SQUELCH AND POCKET BEEP	57
Tone/DTCS squelch	58
Tone squelch and DTCS squelch	58
Reverse Tone/DTCS squelch	58
Setting CTCSS tone or DTCS code	58
Setting DTCS polarity	58
Operation	59
Pocket Beep function	61
Waiting for a call from a specific station	61
Calling a waiting station using the Pocket Beep function	62
Tone scan	63
DTCS encoder (Transmit only)	64
SET MODES	65
Using the Set mode	66
Set mode items	66
Using the Initial Set mode	69
Initial Set mode items	69
Using the Option Set mode	72
Option Set mode items	72
OTHER FUNCTIONS	73
Weather channel operation (For only the USA version)	74
Selecting a Weather channel	74
Using the Weather Alert function	74
Microphone keys	75
[F-1] and [F-2] on the HM-133V microphone	75
The [UP] and [DN] keys on a microphone other than the HM-133V	75
One-touch PTT function	76
About the volume level and the squelch level	76
Resetting	77
Partial Reset	77
All Reset	77
PROGRAMMING	78
Programming operation	79
Cloning between two transceivers	79
Programming using a PC	80
INSTALL AND CONNECTIONS	81
Connecting a microphone	82
Connecting a DC power cable	82
Installing in a vehicle	83
Mounting the transceiver	83
Installing an antenna	84
Antenna location	84
Connecting to a battery	84
Fuse replacement	85
TROUBLESHOOTING	86

Icom IC-V3500 Advanced Manual - Page 67

Tuning step, Scan Stop timer, Display dimmer, Auto dimmer, Display contrast, Transmit permission

Page 67 highlights