Icom IC-V3500 Advanced Manual - Page 72
Using the Option Set mode, Option Set mode items, DTMF Memory encoder, AF output selection
View all Icom IC-V3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
8. SET MODES Using the Option Set mode The Option Set mode can be accessed when "BAK" or "TVo" is set to "OK" ([BANK/OPT] key) setting in the Initial Set mode (p. 8-6). Option Set mode items NOTE: The default settings may differ, depending on the transceiver version. DTMF Memory encoder (Default: OF) Turns the DTMF Memory encoder ON or OFF. LLWhen the function is turned ON, the 100 MHz digit on the function display is changed to "d." LLSee page 6-2 for details. •• OF: Turns OFF the function. •• ON: You can enter and transmit a DTMF code. AO AO NAR MID LOW SET ANM MONI NAR MID LOW SET ANM MONI AF output selection (Default: OF) The IC-V3500 has 3 AF output selections. Select the audio output that suits you. LLThis item may not be displayed, depending on the transceiver version. LLWhen the setting of this item is changed, the "RSP" (AF output selection) setting in the Marine Set mode will be set as follows. •• OF: The received audio is output from only the speaker jack. (When no external speaker is connected, audio is output from the internal speaker.) •• AL: The received audio is output from both the internal speaker and the speaker jack. •• IN: The received audio is output from only the internal speaker. AO NAR MID LOW SET ANM MONI 1. Hold down [BANK OPT] for 1 second to enter the Option Set mode. 2. Push [SET LOCK] or [MONI ANM PA] to select the desired item. 3. Rotate [DIAL] to set an option or value. 4. Push any key other than [SET LOCK] or [MONI ANM PA] to save and exit the Option Set mode. 8-8