Icom IC-V3500 Advanced Manual - Page 18

3. MEMORY OPERATION Selecting a Call channel The factory default frequency is entered in the Call channel. zz Repeatedly push [M/CALL PRIO] to select the Call channel. ••A "C" is displayed. LLPush [M/CALL PRIO] again to select the Memory mode, or push [V/MHz SCAN] to select the VFO mode. NOTE: When the VFO mode is selected from the Call channel, a small "c" is displayed instead of the Memory channel number. Using the HM-133V microphone zz Hold down [MR/CALL] for 1 second to select the Call channel. LLPush [MR/CALL] to select the Memory mode, or push [VFO/LOCK] to select the VFO mode. MUTE NAR MID LOW LOCK SET DIGITAL PRIO AO BUSY ANM MONI DUP LOW T-SCAN TONE PRIO M/CALL SCAN V/ MHz Call channel "C" is displayed. Entering a Memory/Call channel The VFO settings, including the Set mode contents, such as subaudible tone frequency and so on, can be entered into a Memory or Call channel. 1. Set the frequency in the VFO mode. LLIf desired, set other data (Example: frequency offset, duplex direction, and tone squelch). 2. Push [S.MW MW] to enter the Memory Write mode. ••" " and the Memory channel number blink. 3. Rotate [DIAL] to select a Memory or Call channel. LLIf the selected Memory channel is blank, only the Memory channel number is displayed. 4. Hold down [S.MW MW] for 1 second to write. ••Three beeps sound. LLThe Memory channel number automatically increases when holding down [S.MW MW] after writing. NOTE: You can also set a Memory channel in other ways. Example: E ntering the Memory contents to a different Memory channel or the Call channel. (p. 3-7) Example: Entering 145.870 MHz to Memory channel 20. Set the frequency in the VFO mode. MUTE NAR MID LOW LOCK SET ANM MONI DIGITAL PRIO AO BUSY DUP LOW T-SCAN TONE PRIO M/CALL SCAN V/ MHz Push [S.MW MW] to enter the Memory Write mode. DIGITAL PRIO AO BUSY MUTE NAR " " and the Memory Channel MID LOW LOCK ANM number blink. DUP T-SCAN PRIO SCAN SET MONI LOW TONE M/CALL V/MHz Rotate [DIAL] to select Memory channel 20. MUTE NAR MID LOW LOCK SET ANM MONI DIGITAL PRIO AO BUSY DUP LOW T-SCAN TONE PRIO M/CALL SCAN V/ MHz Hold down [S.MW MW] for 1 second to write. MUTE NAR MID LOW LOCK SET ANM MONI DIGITAL PRIO AO BUSY 3 beeps sound. DUP LOW T-SCAN TONE PRIO M/CALL SCAN V/ MHz MUTE NAR MID LOW LOCK SET ANM MONI DIGITAL PRIO AO BUSY DUP LOW T-SCAN TONE PRIO M/CALL SCAN V/ MHz 3-4