Home » Intel Manuals » Processors » Intel BX80580Q9400 » Manual Viewer

Intel BX80580Q9400 User Manual - Page 19

Additional Required Software Not included in the, Development Kit

UPC - 735858203074

Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Getting Started 2.4 Hard Drives and Optical Disc Drives and cables: One SATA hard disk drive and one SATA optical DVD Drive are included in the development kit. Up to four SATA drives and two IDE devices (master and slave) may be connected to the development board. An optical disc drive (included) may be used to load the OS. All these storage devices may be attached to the board simultaneously. Video Adapter Card: Integrated video is output from the VGA connector on the back panel of the development board. Alternately, a standard PCI Express* video adapter card, ADD2 card or MEC video adapter card may be used for additional display flexibility. Please contact the respective vendors for drivers and software for adapters not provided with this development kit. Check the BIOS and the graphics driver, where appropriate, for the proper video output settings. Network Adapter and cables: A Gigabit network interface is provided on the development board. The network interface will not be operational until after all the necessary drivers are installed. A standard PCI/PCI Express* adapter may be used in conjunction with, or in place of, the onboard network adapter. Please contact the respective vendors for drivers and necessary software for adapters not provided with this development kit. You must supply appropriate network cables to utilize the LAN connector or any other installed network cards. Other Devices and Adapters: The development board functions much like a standard desktop computer motherboard. Most PC-compatible peripherals can be attached and configured to work with the development board. Additional Required Software (Not included in the Development Kit) The following additional software may be necessary to operate the development board. Operating System: The user must supply any needed operating system installation files and licenses. Application Software: The user must supply any needed application software. Development Kit User's Manual 19

Section	Page
Intel® CoreTM 2 Duo Processor and Intel® GS45 Express Chipset (with DDR3 System Memory)	1
Contents	3
Revision History	7
1 About This Manual	8
1.1 Content Overview	8
1.2 Text Conventions	9
1.3 Glossary of Terms and Acronyms	10
1.4 Development Kit Technical Support	14
1.4.1 Online Support	14
1.4.2 Additional Technical Support	14
1.5 Related Documents	15
1.5.1 Ordering Hard Copies of Documents	15
2 Getting Started	17
2.1 Overview	17
2.2 Development Kit Contents	17
2.3 Additional Required Hardware (Not Included in the Development Kit)	18
2.4 Additional Required Software (Not included in the Development Kit)	19
2.5 Workspace Preparation	20
2.6 System Setup and Power-Up	21
2.6.1 Using the AC to DC Power Supply (Mobile Power Mode)	22
2.7 Power Down	23
2.8 System BIOS	23
2.8.1 Configuring the BIOS	23
2.8.2 Programming BIOS Using a Bootable USB Device	24
3 Development Board Features	26
3.1 Block Diagram	26
3.2 Mechanical Form Factor	26
3.3 Development Board Key Features	26
3.4 Software Key Features	30
3.4.1 AMI BIOS	30
3.5 Thermal Management	31
3.6 System Features and Operation	31
3.6.1 Processor Support	31
3.6.2 Processor Voltage Regulators	32
3.6.3 Front-Side Bus (FSB)	32
3.6.4 Processor Power Management	32
3.6.5 Processor Active Cooling	32
3.6.6 Manual Processor Voltage ID (VID) Support	32
3.6.7 Chipset	33
3.6.8 System Memory	33
3.6.9 Video Display	34
3.6.10 PCIe Slots	34
3.6.11 PCI Slots	35
3.6.12 On-Board LAN	35
3.6.13 Serial Peripheral Interface (SPI)	36
3.6.14 Soft Audio/Soft Modem	36
3.6.15 SATA Storage	36
3.6.16 USB Connectors	37
3.6.17 LPC Super I/O (SIO)/LPC Slot	38
3.6.18 Serial, IrDA	38
3.6.19 Intel® 82802 Firmware Hub Device Support	38
3.6.20 System Management Controller (SMC)/Keyboard Controller (KBC)	39
3.6.21 Clocks	39
3.6.22 Real Time Clock	39
3.6.23 Thermal Monitoring	39
3.6.24 Power Supply Solution	40
3.6.25 Manual VID support for Graphics VR	40
3.6.26 Debug Interfaces	41
3.6.27 Board Form-Factor	41
3.7 Power Management	41
3.7.1 Power Management States	41
3.8 Testability	42
3.9 Power Measurement Support	42
3.10 Power Supply Usage and Recommendation	47
4 Development Board Physical Reference	48
4.1 Board Components	48
4.2 Connectors	51
4.2.1 Back Panel Connectors	51
4.3 Configuration Settings	53
4.3.1 Configuration Jumpers/Switches	53
4.3.2 BSEL Jumper Settings	56
4.4 Power and Reset Push Buttons	56
4.5 Net Detect Button	57
4.6 LEDs	58
4.7 Other Headers	59
4.7.1 H8 Programming Headers	59
4.7.2 Sideband and Test Headers	60
Appendix A Add-In Cards	61
A.1 Port 80-83 Add-in Card (Included)	61
A.2 PCI Expansion Card (Thimble Peak 2) (Included)	62
A.3 HDMI and Display Port Video Interface Add-In Card (Eaglemont) (Included)	62
A.3.1 Rework to change Eaglemont Card from HDMI to Display Port	63
A.3.2 AUX Pull Down Rework.	65
A.4 Intel® High Definition Audio Interposer Card (Mott Canyon 4) (Not Included)	66
A.4.1 Mott Canyon 4 Jumper Settings	67
A.5 ExpressCard Module Interposer (Duck Bay 3) (Not Included)	69
A.6 PCI Express mini card Interposer (Upham IV) (Not Included)	70
A.7 Docking Connector Card (Saddlestring II) (Not Included)	71
Appendix B Rework Instructions	74
B.1 Internal HDMI Enabling	74
B.2 Enabling the Integrated Trusted Platform Module (iTPM)	74
B.3 Enabling External HDMI	75
B.4 Support for Upham 4	75
B.5 Low Voltage High-Definition (HD) Audio Rework	75
Appendix C Programming System BIOS Using a Flash Programming Device	77

Match case Limit results 1 per page

Getting Started

Development Kit User’s Manual

Hard Drives and Optical Disc Drives and cables:

One SATA hard disk drive and

one SATA optical DVD Drive are included in the development kit.

Up to four SATA

drives and two IDE devices (master and slave) may be connected to the development

board. An optical disc drive (included) may be used to load the OS. All these storage

devices may be attached to the board simultaneously.

Video Adapter Card:

Integrated video is output from the VGA connector on the back

panel of the development board. Alternately, a standard PCI Express* video adapter

card, ADD2 card or MEC video adapter card may be used for additional display

flexibility. Please contact the respective vendors for drivers and software for adapters

not provided with this development kit. Check the BIOS and the graphics driver,

where appropriate, for the proper video output settings.

Network Adapter and cables:

A Gigabit network interface is provided on the

development board. The network interface will not be operational until after all the

necessary drivers are installed. A standard PCI/PCI Express* adapter may be used in

conjunction with, or in place of, the onboard network adapter. Please contact the

respective vendors for drivers and necessary software for adapters not provided with

this development kit.

You must supply appropriate network cables to utilize the LAN connector or any other

installed network cards.

Other Devices and Adapters:

The development board functions much like a

standard desktop computer motherboard. Most PC-compatible peripherals can be

attached and configured to work with the development board.

2.4

Additional Required Software (Not included in the

Development Kit)

The following additional software may be necessary to operate the development

board.

Operating System:

The user must supply any needed operating system installation

files and licenses.

Application Software:

The user must supply any needed application software.