Intel BX80580Q9400 User Manual - Page 55
Reference, Designator, Description, Default, Setting, Optional
UPC - 735858203074
View all Intel BX80580Q9400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Development Board Physical Reference Reference # Designator Description J8G4 22 23 J8G5 J8G6 24 25 J8G7 26 J8H1 27 J9C1 28 J9D1 29 J9F2 J9G2 30 31 J9H1 J9H2 32 33 J9H3 34 J9H4 SMC MD2 CRB/SV Detect SMC MD1 KBC disable Boot BIOS Strap PROGRAMMING SPI1 PROGRAMMING SPI0 KSC Enable Boot Block Programming NMI SATA interlock switch for port1 LID Position Virtual Battery Default Setting Operation) 1-X 1-X (CRB) 1-2 (Normal Operation) 1-X (KBC enabled 1-2 1-X 1-X 1-2 1-2 (Normal Operation) 1-X 1-2 (Present) Optional Setting 1-2 Advanced Single chip mode 1-2 SV 1-X No external Programming 1-2 KBC disbled 1-X PCI to LPC 1-2 Program SPI-0 1-2 Program SPI-1 1-X 1-X to Program the H8 1-2 Disabled 1-X Disabled 1-X 1-2 1-X 1-2 Note: A jumper consists of two or more pins mounted on the motherboard. When a jumper cap is placed over two pins, it is designated as 1-2. When there are more than two pins on the jumper, the pins to be shorted are indicated as 1-2 (to short pin 1 to pin 2), or 2-3 (to short pin 2 to pin 3). When no jumper cap is to be placed on the jumper, it is designated as 1-X. Development Kit User's Manual 55