Intel BX80580Q9400 User Manual - Page 63
A.3.1, Rework to change Eaglemont Card from HDMI to, Display Port
UPC - 735858203074
View all Intel BX80580Q9400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Add-In Cards Figure 12. Eaglemont Add-in Card A.3.1 Rework to change Eaglemont Card from HDMI to Display Port Note: All rework should use lead-free solder in order to keep the board RoHS compliant. 1. Resistors R5D7, R5D5, R5D3, R5C19, R5C16, R5C12, and R5C11 need to be taken off and placed in the ref des. R5D6, R5D4, R5D, R5C18, R5C17, R5C14, R5C13, and R5C10. In the picture below the highlighted areas show where the resistors should end up. Move the vertically-mounted resistors horizontally. Development Kit User's Manual 63
Add-In Cards
Development Kit User’s Manual
63
Figure 12. Eaglemont Add-in Card
A.3.1
Rework to change Eaglemont Card from HDMI to
Display Port
Note:
All rework should use lead-free solder in order to keep the board RoHS compliant.
1.
Resistors R5D7, R5D5, R5D3, R5C19, R5C16, R5C12, and R5C11 need to be
taken off and placed in the ref des. R5D6, R5D4, R5D, R5C18, R5C17, R5C14,
R5C13, and R5C10. In the picture below the highlighted areas show where the
resistors should end up. Move the vertically-mounted resistors horizontally.