Intel S1200BT Technical Product Specification - Page 127
Jumper Blocks - s1200btl bios update
View all Intel S1200BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Intel® Server Board S1200BT TPS Jumper Blocks 8. Jumper Blocks The server board has several 3-pin jumper blocks that can be used to configure, protect or recover specific features of the server board. Figure 46. Jumper Blocks (J4A2, J1F1, J1F3, J1F2, and J1E2) on S1200BTL Table 43. Server Board Jumpers (J1F1, J1F2, J1F3, J1E2, and J4A2) on S1200BTL Jumper Name J1E2: CMOS Clear Pins 1-2 2-3 J1F2: ME 1-2 Force Update 2-3 J1F1: 1-2 Password Clear 2-3 J1F3: BIOS 1-2 Recovery 2-3 J4A2: BMC 1-2 Force Update 2-3 System Results These pins should have a jumper in place for normal system operation. (Default) If these pins are jumpered with AC power plugged, the CMOS settings are cleared within five seconds. These pins should not be jumpered for normal operation. ME Firmware Force Update Mode - Disabled (Default) ME Firmware Force Update Mode - Enabled These pins should have a jumper in place for normal system operation. (Default) If these pins are jumpered, administrator and user passwords are cleared within 5-10 seconds after the system is powered on. These pins should not be jumpered for normal operation. These pins should have a jumper in place for normal system operation. (Default) Given that the main system BIOS will not boot with these pins jumpered, system can only boot from EFI-bootable recovery media with the recovery BIOS image. Integrated BMC Firmware Force Update Mode - Disabled (Default) Integrated BMC Firmware Force Update Mode - Enabled Revision 2.0 115 Intel order number G13326-004