Intel S1200BT Technical Product Specification - Page 45

Network Interface Controller NIC - s1200bts motherboard

Page 45 highlights

Intel® Server Board S1200BT TPS Functional Architecture  In the single mode (dual monitor video = disabled), the on-board video controller is disabled when an add-in video card is detected.  In single mode, the onboard video controller is disabled when an add-in video card is detected.  In dual mode, the onboard video controller is enabled and is the primary video device. The external video card is allocated resources and is considered the secondary video device.  When KVM is enabled in iBMC FW, dual video is enabled. Table 11. Dual Video Modes Onboard Video Dual Monitor Video Enabled Disabled Enabled Disabled Onboard video controller. Warning: System video is completely disabled if this option is disabled and an add-in video adapter is not installed. If enabled, both the onboard video controller and an add-in video adapter are enabled for system video. The onboard video controller becomes the primary video device. 3.7.2 Video for Intel® Server Board S1200BTS SM712 is a video chip from Silicon Motion, Inc (SMI). It is one in SMI's LynxEM family. It is PCI 2.1 compliant with the standard PCI 33MHz and 66 MHz PCI Master/Slave interface.  33 MHz and 66 MHz PCI Master/Slave interface  PCI 2.1 compliant  Memory control is provided for the 4MB internal memory  Support 640x480, 800x600, 1024x768 resolution and up to 85Hz.  Dual Video mode is supported. 3.8 Network Interface Controller (NIC) The Intel® Server Board S1200BT supports two network interfaces, One is provided from the onboard Intel® 82574L GbE PCI Express network controller; the other is the onboard Intel® 82579 Gigabit Network controller. 3.8.1 Gigabit Ethernet Controller 82574L The 82574 family (82574L and 82574IT) are single, compact, low-power components that offer a fully-integrated Gigabit Ethernet Media Access Control (MAC) and Physical Layer (PHY) port. The 82574 uses the PCI Express* architecture and provides a single-port implementation in a relatively small area so it can be used for server and client configurations as a LAN on Motherboard (LOM) design. External interfaces provided on the 82574:  PCIe Rev. 2.0 (2.5 GHz) x1  MDI (Copper) standard IEEE 802.3 Ethernet interface for 1000BASE-T, 100BASETX, and 10BASE-T applications (802.3, 802.3u, and 802.3ab)  NC-SI or SMBus connection to a Manageability Controller (MC) Revision 2.0 33 Intel order number G13326-004

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164

Intel®
Server Board S1200BT TPS
Functional Architecture
Revision 2.0
Intel order number G13326-004
33
In the single mode (dual monitor video = disabled), the on-board video controller is
disabled when an add-in video card is detected.
In single mode, the onboard video controller is disabled when an add-in video card
is detected.
In dual mode, the onboard video controller is enabled and is the primary video device.
The external video card is allocated resources and is considered the secondary
video device.
When KVM is enabled in iBMC FW, dual video is enabled.
Table 11. Dual Video Modes
Onboard Video
Enabled
Disabled
Onboard video controller.
Warning: System video is completely disabled if
this option is disabled and an add-in video
adapter is not installed.
Dual Monitor Video
Enabled
Disabled
If enabled, both the onboard video controller
and an add-in video adapter are enabled for
system video. The onboard video controller
becomes the primary video device.
3.7.2
Video for Intel
®
Server Board S1200BTS
SM712 is a video chip from Silicon Motion, Inc (SMI). It is one in SMI
s LynxEM family. It is PCI
2.1 compliant with the standard PCI 33MHz and 66 MHz PCI Master/Slave interface.
33 MHz and 66 MHz PCI Master/Slave interface
PCI 2.1 compliant
Memory control is provided for the 4MB internal memory
Support 640x480, 800x600, 1024x768 resolution and up to 85Hz.
Dual Video mode is supported.
3.8
Network Interface Controller (NIC)
The Intel
®
Server Board S1200BT supports two network interfaces, One is provided from the
onboard Intel
®
82574L GbE PCI Express network controller; the other is the onboard Intel
®
82579 Gigabit Network controller.
3.8.1
Gigabit Ethernet Controller 82574L
The 82574 family (82574L and 82574IT) are single, compact, low-power components that offer
a fully-integrated Gigabit Ethernet Media Access Control (MAC) and Physical Layer (PHY) port.
The 82574 uses the PCI Express* architecture and provides a single-port implementation in a
relatively small area so it can be used for server and client configurations as a LAN on
Motherboard (LOM) design.
External interfaces provided on the 82574:
PCIe Rev. 2.0 (2.5 GHz) x1
MDI (Copper) standard IEEE 802.3 Ethernet interface for 1000BASE-T, 100BASETX,
and 10BASE-T applications (802.3, 802.3u, and 802.3ab)
NC-SI or SMBus connection to a Manageability Controller (MC)