Intel TIGI2U User Guide - Page 41

Installing and Removing Memory DIMMs

Get Intel TIGI2U - Carrier Grade Server PDF manuals and user guides
UPC - 735858176958
View all Intel TIGI2U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Platform Installations and Upgrades Installing and Removing Memory DIMMs The silkscreen on the board for the DIMMs displays DIMM1B, DIMM1A, DIMM2B, DIMM2A, DIMM3B and DIMM3A, starting from the outside of the board. DIMM1B is the socket closest to the outside edge of the server board. Installing DIMMs To install DIMMs, follow these steps: 1. Power down the server system and unplug all peripheral devices and the AC power cable or the DC mains. 2. Remove the chassis cover. For instructions, see "Removing the Chassis Cover." 3. Locate the DIMM sockets. See below. Figure 16. Installing Memory DIMMs 4. Push the clips at each end of the DIMM socket(s) outward to the open position. See Figure 16. 5. Holding the DIMM by the edges, remove it from its anti-static package. 6. Position the DIMM above the socket. Align the small notch in the bottom edge of the DIMM with the keys in the socket. 7. Insert the bottom edge of the DIMM into the socket. 8. Push down on the top edge of the DIMM until the retaining clips snap into place. Make sure the clips are firmly in place. Intel® Carrier Grade Server TIGI2U User Guide 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
Platform Installations and Upgrades
Intel
®
Carrier Grade Server TIGI2U User Guide
41
Installing and Removing Memory DIMMs
The silkscreen on the board for the DIMMs displays DIMM1B, DIMM1A, DIMM2B,
DIMM2A, DIMM3B and DIMM3A, starting from the outside of the board. DIMM1B is the
socket closest to the outside edge of the server board.
Installing DIMMs
To install DIMMs, follow these steps:
1.
Power down the server system and unplug all peripheral devices and the AC power
cable or the DC mains.
2.
Remove the chassis cover. For instructions, see “
Removing the Chassis Cover
.”
3.
Locate the DIMM sockets. See below.
Figure 16.
Installing Memory DIMMs
4.
Push the clips at each end of the DIMM socket(s) outward to the open position. See
Figure 16
.
5.
Holding the DIMM by the edges, remove it from its anti-static package.
6.
Position the DIMM above the socket. Align the small notch in the bottom edge of the
DIMM with the keys in the socket.
7.
Insert the bottom edge of the DIMM into the socket.
8.
Push down on the top edge of the DIMM until the retaining clips snap into place. Make
sure the clips are firmly in place.