Intel TIGI2U User Guide - Page 66
Replacing the PCI Riser Board
UPC - 735858176958
View all Intel TIGI2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Platform Installations and Upgrades Replacing the PCI Riser Board CAUTION Before replacing any of the server boards, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet or disconnect the DC mains. Use the following instructions to replace the PCI riser board. 1. Power down the server system and unplug all peripheral devices and the AC power cable or the DC mains. 2. Remove the chassis cover. For instructions, see "Removing the Chassis Cover." 3. Disengage the power from the PCI riser assembly. 4. Remove the PCI card(s). For instructions, see "Removing a PCI Add-in Card." 5. Depress and hold the blue retention mechanism (see letter "A" in the figures below). 6. Slide the riser board over the placement peg(s) (see letter "B" the figures below) and remove the riser board (see letter "C" in the figures below). 7. If replacing the full-height riser board, unplug the 5V power cable from the riser board (see letter "D" in Figure 44). Figure 43. Removing the Low-Profile PCI Riser Board 66 Intel® Carrier Grade Server TIGI2U User Guide