Intel TIGI2U User Guide - Page 57
Replacing the Four-Fan Assembly
UPC - 735858176958
View all Intel TIGI2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Platform Installations and Upgrades Grounding a DC Powered System The DC chassis provides two #10-32 threaded studs for chassis enclosure grounding. A single 90º standard barrel two-hole compression terminal lug with 5/8-inch pitch suitable for #14-10 AWG conductor (such as the Thomas & Betts terminal lug p/n 256-31426-141) must be used for proper safety grounding. NOTE A crimping tool may be needed to secure the terminal lug to the grounding cable. Figure 35 shows how the four #10-32 nuts connect to the 90º two-hole terminal lug. Tighten each to 10 in-lb torque. Figure 35. Connecting the Terminal Lug Replacing the Four-Fan Assembly CAUTION Your server does not have hot-swappable fans. Before replacing any of the fans, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet or disconnect the DC mains. Intel® Carrier Grade Server TIGI2U User Guide 57