Intel TIGI2U User Guide - Page 58
Removing the Four-Fan Assembly
UPC - 735858176958
View all Intel TIGI2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Platform Installations and Upgrades Removing the Four-Fan Assembly 1. Power down the server system and unplug all peripheral devices and the AC power cable or the DC mains. 2. Remove the chassis cover. For instructions, see "Removing the Chassis Cover." 3. Remove the processor air duct. For instructions, see "Removing the Processor Air Duct." 4. Disconnect the fan connectors from the front panel I/O board (see letter "A" in Figure 36). 5. Remove the captive screw that attaches the four-fan assembly to the chassis (see letter "B" in Figure 36). 6. Lift the fan module and remove it from the chassis (see letter "C" in Figure 36). Figure 36. Removing the Four-Fan Assembly 58 Intel® Carrier Grade Server TIGI2U User Guide
Platform Installations and Upgrades
Intel
®
Carrier Grade Server TIGI2U User Guide
58
Removing the Four-Fan Assembly
1.
Power down the server system and unplug all peripheral devices and the AC power
cable or the DC mains.
2.
Remove the chassis cover. For instructions, see
“Removing the Chassis Cover.”
3.
Remove the processor air duct. For instructions, see
“Removing the Processor Air
Duct.”
4.
Disconnect the fan connectors from the front panel I/O board (see letter “A” in Figure
36).
5.
Remove the captive screw that attaches the four-fan assembly to the chassis (see
letter “B” in Figure 36).
6.
Lift the fan module and remove it from the chassis (see letter “C” in Figure 36).
Figure 36.
Removing the Four-Fan Assembly