Intel TIGI2U User Guide - Page 75
Installing the Server Board
![]() |
UPC - 735858176958
View all Intel TIGI2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Platform Installations and Upgrades Installing the Server Board 1. If you have a SCSI cable to connect, do this first before installing the server board (see letter "A" in the figure below). 2. Set the replacement board into place (see letter "B" in the figure below), using caution to make sure no cables are pinched under the board. Insert the rear edge of the board first, and line up the I/O ports at the rear of the system. 3. Make sure the standoff locations line up correctly and reinsert the eight screws removed in step 9, under "Removing the Server Board." See letter "D" in the figure below. Figure 54. Installing the Server Board Intel® Carrier Grade Server TIGI2U User Guide 75
![](/manual_guide/products/intel-tigi2u-user-guide-fa61d82/75.png)
Platform Installations and Upgrades
Intel
®
Carrier Grade Server TIGI2U User Guide
75
Installing the Server Board
1.
If you have a SCSI cable to connect, do this first before installing the server board (see
letter “A” in the figure below).
2.
Set the replacement board into place (see letter “B” in the figure below), using caution
to make sure no cables are pinched under the board. Insert the rear edge of the board
first, and line up the I/O ports at the rear of the system.
3.
Make sure the standoff locations line up correctly and reinsert the eight screws
removed in step 9, under
“Removing the Server Board.”
See letter “D” in the figure
below.
Figure 54.
Installing the Server Board