Intel TIGI2U User Guide - Page 52
Caution
UPC - 735858176958
View all Intel TIGI2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Platform Installations and Upgrades 5. Place riser assembly as shown. • To install a low-profile PCI card (see Figure 28): Unlock the tool-less retention bar as shown (see letter "A") and insert the card into one of the slots on the riser connector (see letter "B"). Lock the tool-less retention bar into place. • To install a full-height PCI card (see Figure 29): Insert the card into one of the slots on the riser connector (see letter "A") and screw the PCI card bracket into place as shown (see letter "B"). Close the retention bar and lock it in place (see letter "C"). NOTE When populating add-in cards, the add-in cards must be installed starting with the slot furthest from the server board. For example, when using a three slot riser, a single add-in card must be installed in the top PCI slot. A second add-in card must be installed in the middle slot, and so on. CAUTION Press the riser card straight into the slot. Tipping it in the slot while installing it may damage the riser card, board slot, or the PCI card. Figure 28. Installing Low-Profile PCI Card into Riser 52 Intel® Carrier Grade Server TIGI2U User Guide