Intel TIGI2U User Guide - Page 53
Removing a PCI Add-in Card
![]() |
UPC - 735858176958
View all Intel TIGI2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Platform Installations and Upgrades Figure 29. Installing Full Length PCI Card into Riser 6. Insert the PCI riser assembly into the chassis. 7. Install the chassis cover. For instructions, see "Installing the Chassis Cover." Removing a PCI Add-in Card 1. Power down the server system and unplug all peripheral devices and the AC power cable or the DC mains. 2. Remove the chassis cover. For instructions, see "Removing the Chassis Cover." 3. Disengage the power connector from the PCI riser card assembly. 4. Lift blue tabs and pull up on the riser to remove the PCI riser card assembly from the chassis (see Figure 27). 5. Place riser assembly as shown. • To remove a low-profile PCI card (see Figure 30): Unlock the tool-less retention bar as shown (see letter "A") and pull the PCI card from the riser card slot (see letter "B"). • To remove a full-height PCI card (see Figure 31): Unlock the retention bar as shown (see letter "A"). Unscrew the PCI card bracket (see letter "B") and pull the PCI card from the riser card slot (see letter "C"). Intel® Carrier Grade Server TIGI2U User Guide 53
![](/manual_guide/products/intel-tigi2u-user-guide-fa61d82/53.png)