Intermec CN50 CN50 Mobile Computer for Windows Embedded Handheld 6.5 User Manu - Page 116
Good Read, Data Collection, Symbologies
![]() |
View all Intermec CN50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Chapter 9 - Troubleshoot and Maintain the Computer Problem Solution When you release a Scan button or handle The Good Read light will remain on if you configure trigger, the Good Read light does not the computer to use continuous/edge triggering. If you turn off. configure the computer for level triggering and the Good Read light remains on, there may be a problem. Press one of the Scan buttons or pull the trigger again without scanning a bar code label. If the light is still on, contact your local Intermec representative. The scanner will not read the bar code • Aim the scanner beam to cross entire bar code label label. in one pass. Vary the scanning angle. • Check the quality of the bar code label, Scan a bar code label that you know will scan. Compare the two bar code labels to see if the bar code quality is too low. You may need to replace the label that you cannot scan. • Make sure the bar code symbology is enabled and configured correctly. Use Intermec Settings to check the symbologies. Expand Data Collection > Symbologies beneath devices listed (scanner, virtual wedge) to check and enable symbologies, then scan the bar code label again. • Make sure the computer application is expecting input from a bar code. You may need to type this information instead. The scanner does not read the bar code labels quickly, or the scanning beam seems to be faint or obscured. You scan a valid bar code label to enter data for your application. The data decoded by the scan module does not match the data encoded in the bar code label. The scanner window may be dirty. Clean the window with a solution of ammonia and water. Wipe dry. Do not allow abrasive material to touch the window. The computer may have decoded the bar code label in a symbology other than the label's actual symbology. Try scanning the bar code label again. Make sure you scan the entire label. 102 CN50 Mobile Computer for Windows Embedded Handheld 6.5 User Manual
![](/manual_guide/products/intermec-cn50-cn50-mobile-windows-embedded-handheld-65-user-manual-5374a56/116.png)