Intermec CN50 CN50 Mobile Computer for Windows Embedded Handheld 6.5 User Manu - Page 93
Con WPA or WPA2 Personal PSK Security with Funk
View all Intermec CN50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Chapter 7 - Configure the Computer c For Validate Server Certificate, choose Yes. Note: The correct date must be set on your CN50 when you enable Validate Server Certificate. 7 If you choose TLS: a Load a user and root certificate on your CN50. For help, see "Load a Certificate" on page 86. b Enter a User Name and Subject Name. c For Validate Server Certificate, choose Yes. d (Optional) To increase your level of security, enter a Server 1 Common name and a Server 2 Common name. Configure WPA or WPA2 Personal (PSK) Security with Funk After you configure the communications and radio parameters on your mobile computer and select Funk as your security choice, you can configure WPA-PSK or WPA2-PSK. 1 Start Intermec Settings. 2 Choose Communications > 802.11 Radio > Funk Security. 3 Select the profile you want to configure. 4 For Association, choose WPA or WPA2. 5 For 8021x, choose None. 6 For Pre-Shared Key, enter the pre-shared key or passphrase. The pre-shared key must be a value of 32 hex pairs preceded by 0x for a total of 66 characters. The value must match the key value on the access point. The passphrase must be from 8 to 63 characters. After you enter a passphrase, the CN50 internally converts it to a pre-shared key. This value must match the passphrase on the authenticator. 7 Save your settings. CN50 Mobile Computer for Windows Embedded Handheld 6.5 User Manual 79