Intermec CN50 CN50 Mobile Computer for Windows Embedded Handheld 6.5 User Manu - Page 121
Clean the Computer
View all Intermec CN50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Chapter 9 - Troubleshoot and Maintain the Computer 3 When the CN50 starts the boot process, simultaneously press < and > until the IPL Boot Configuration Menu appears on the screen. 4 Press 2 to select Force Clean Boot and then press 0 to select Continue with Boot. The CN50 executes the clean boot. This process takes a few minutes 5 When prompted, tap the screen to set up the CN50. 6 Follow the instructions to calibrate the screen. Clean the Computer To keep the computer in good working order, you may need to clean the imager window, color camera window, and the touch screen. Clean the windows and the touch screen as often as needed for the environment in which you are using the computer. To clean the computer, use a solution of one part ammonia and three parts water. There are no user-serviceable parts inside the computer. Opening the computer will void the warranty and may cause damage to the internal components. 1 Press the Power button to suspend the CN50. 2 Dip a clean cloth towel in the ammonia solution and wring out the excess. 3 Wipe off the imager window, camera lens, and flash area. Do not allow any abrasive material to touch these surfaces. 4 Wipe dry. CN50 Mobile Computer for Windows Embedded Handheld 6.5 User Manual 107