Intermec CN50 CN50 Mobile Computer for Windows Embedded Handheld 6.5 User Manu - Page 82
Enable the Wi-Fi Radio With ScanNGo Bar Codes, Con Ethernet Communications
View all Intermec CN50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Chapter 7 - Configure the Computer Enable the Wi-Fi Radio With ScanNGo Bar Codes Use the ScanNGo bar code to enable the Wi-Fi radio and set the Funk security to its default settings. To enable the Wi-Fi radio and set all communication settings to their default values, scan the following ScanNGo bar code. • Enable Wi-Fi, set Funk defaults (Wi-Fi, WWAN Radio if applicable) The ScanNGo application starts, enables the radio, and configures the default security settings. If you want to change the security settings from their default values, see "About Wireless Security" on page 76. Configure Ethernet Communications You connect your CN50 to your Ethernet network with an Ethernet cable and an AD24 Ethernet multidock or AD27 single dock with Ethernet adapter. 1 Connect your CN50 to an Ethernet network with an AD24. Ethernet communications is automatically enabled on your CN50. 2 Make sure that your CN50 is communicating with the network. You should see the network connection icon ( ) in the navigation bar. 68 CN50 Mobile Computer for Windows Embedded Handheld 6.5 User Manual