Intermec CN50 CN50 Mobile Computer for Windows Embedded Handheld 6.5 User Manu - Page 91

Chapter 7 - Configure the Computer You must use either Funk or Microsoft security to implement your security solution. For details, see the next section. If you are using WPA-802.1x, WPA2-802.1x, or 802.1x security, this section also assumes that your authentication server and authenticators are properly configured. Note: Your security choice does not depend on your authentication server. For example, you can choose Funk security if you use Microsoft Active Directory® to issue certificates. Choose Between Microsoft and Funk Security The computer supports both Funk and Microsoft security, which dynamically selects wireless networks based on your preferences. The option you choose depends on your network security needs. • If you are using the CN50 in a static environment that requires a high level of security, you should use Funk security, which offers CCX v4.0 compliance, support for LEAP and TTLS, and configuration for up to four profiles. • If you are primarily using the CN50 to connect to Wi-Fi hotspots, you may want to use Microsoft security. To use Microsoft security, you need to select it as your security choice. For help, see "About Microsoft Security" on page 82. About Funk Security You can define up to four profiles for Funk security. Different profiles let your CN50 communicate in different networks without having to change all of your security settings. For example, you may want to set up one profile for the manufacturing floor and one for the warehouse. By default, the active profile is Profile 1. Select a Funk Security Profile You can define up to four Funk security profiles. 1 Start Intermec Settings. For help, see "How to Configure the Computer" on page 60. 2 Choose Communications > 802.11 Radio > Funk Security. 3 Choose a profile. A list of configurable settings appears. CN50 Mobile Computer for Windows Embedded Handheld 6.5 User Manual 77