Intermec CN50 CN50 Mobile Computer for Windows Embedded Handheld 6.5 User Manu - Page 95
Con LEAP Security With Funk, Communications > 802.11 Radio > Funk
View all Intermec CN50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Chapter 7 - Configure the Computer Configure LEAP Security With Funk After you configure the communications and radio parameters on your mobile computer and select Funk as your security choice, you can configure LEAP. 1 Start Intermec Settings. 2 Choose Communications > 802.11 Radio > Funk. 3 Select the profile you want to configure. 4 For 8021x, choose LEAP. 5 For Association, choose Open, WPA, WPA2, or Network EAP. Encryption automatically defaults to TKIP if you choose WPA, AES if you choose WPA2, and WEP if you choose Open or Network EAP. 6 For Prompt for Credentials, choose Enter credentials now. 7 Enter a User Name and User Password. 8 Save your settings. Configure Static WEP Security With Funk After you configure the communications and radio parameters on your mobile computer and select Funk as your security choice, you can configure static WEP security with Funk. Intermec recommends that you use WPA2-PSK instead of WEP if possible. 1 Start Intermec Settings. 2 Choose Communications > 802.11 Radio > Funk Security. 3 Select the profile you want to configure. 4 For Association, choose Open. 5 For Encryption, choose WEP. 6 For 8021x choose None. 7 Define a value for the keys you want to use. You can define up to four keys (Key 1 through Key 4). Enter an ASCII key or a hex key that is either 5 bytes or 13 bytes long depending on the capability of the radio. Set a 5- byte value for CN50 Mobile Computer for Windows Embedded Handheld 6.5 User Manual 81