Intermec CN50 CN50 Mobile Computer for Windows Embedded Handheld 6.5 User Manu - Page 74
How to Con the Computer, Use Intermec Settings On the Computer - factory reset
View all Intermec CN50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Chapter 7 - Configure the Computer How to Configure the Computer You can configure many parameters on the CN50 such as the bar code symbologies it decodes or the network settings. These characteristics are controlled by configuration parameters. The values you set for these configuration parameters determine how the CN50 operates. There are several ways to configure the CN50: • Directly on the CN50 using Intermec Settings. This allows you to change only the settings on that computer. For more information, see the next section, "Use Intermec Settings On the Computer." • You can use the ScanNGo utility, which is part of SmartSystems™ Foundation, to quickly provide the CN50 with the minimal information necessary to connect to a secure network. For more information, see "Configure 802.11 Radio Communications" on page 67 and "Manage the Computer With SmartSystems Foundation" on page 90. • You can use a third party device management product that supports the CN50, such as the Microsoft System Center Mobile Device Manager. For more information, visit the Microsoft website at http://msdn.microsoft.com/en-us/default.aspx. • You can use Imager Configuration Bar codes to enable or disable symbologies, reset to factory defaults, and set predefined imager modes. For more information, see "Imager Configuration Bar Codes" on page 127. Use Intermec Settings On the Computer Use Intermec Settings to configure parameters for Intermec applications on the computer, as well as device-specific parameters like volume. You can configure parameters for important functions like data collection and communications. 60 CN50 Mobile Computer for Windows Embedded Handheld 6.5 User Manual