Intermec PB50 PB50 and PB51 Mobile Printer User Guide - Page 21
Understanding the Printer Sounds, Using the Batteries - out of paper error
View all Intermec PB50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Chapter 1 - Using the Mobile Printer Note: You cannot configure ESC/P from the Setup menu. If your printer is originally in ESC/P and you want to change to Fingerprint or IPL, you need to enter Exteded Test Mode and select the printer language. For more information, see "Understanding Extended Test Mode" on page 25. Understanding the Printer Sounds The printer plays sounds in response to several actions that you can perform. Use the following table to understand when the sounds occur and what they mean. Understanding the Printer Sounds Sound Power Hardware Button Error Occurs When: • You connect the AC power cable or insert a battery. • The printer starts charging the battery. You open the media door, close the media door, or insert a cable. You press any of the printer buttons. • The printer cannot feed paper or print a job because of a hardware issue such as the media door open, a paper jam, or there is no media. • An error occurs such as a paper jam or a print error. Using the Batteries The printer uses a rechargeable 2200 mAh lithium-ion battery (Model AB13) for power. You must fully charge the battery before you can use the printer. When in Standby mode, a fully charged battery can last up to one week without recharging. Use Intermec Model AB13 battery only. Use of another battery may present a risk of fire or explosion. The Model AB13 battery may present a fire or chemical burn hazard if mistreated. Do not disassemble, heat above 100 °C (212 °F), or incinerate. PB50 and PB51 Mobile Printer User Guide 9