Intermec PB50 PB50 and PB51 Mobile Printer User Guide - Page 87
USB Interface, Connecting the Printer Through the, USB Interface - drivers
View all Intermec PB50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Appendix A - Specifications The following illustration shows the PC end of the serial cable. 5 43 2 1 9 87 6 RS-232 Serial Cable DB9 Pins Serial Cable Pins and Description (PC End) Pin Signal 1 DCD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI Description Data carrier detect Receive data from host (input) Transmit data to printer (output) Data terminal ready Ground Data set ready Request to send from host (input) Clear to send from printer (output) Ring indicator USB Interface To use the USB interface to print from a PC, you need to install the Intermec InterDriver printer driver on your PC. For help setting up USB communications, see "Connecting the Printer Through the USB Interface" on page 30. The USB cable that ships with the printer has a USB Type A connector on one end to connect to the PC, and a USB Type B connector on the other end to connect to the printer. You do not need to configure communications for the USB port. PB50 and PB51 Mobile Printer User Guide 75