Intermec PB50 PB50 and PB51 Mobile Printer User Guide - Page 51
Configuring the Mobile Printer, PB50 and PB51 Mobile Printer User Guide
View all Intermec PB50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Chapter 2 - Configuring the Mobile Printer where xxxx is the unique username and the unique password for this protocol. 4 If you are using TTLS, you may need to send this command to set the TTLS outer name: ws,TTLS_USER, xxxx where xxxx is the outer name. 5 If you are using certificates for authentication, you may need the following commands. • Send the following commands to set a certificate and enable validation: ws,CA_CERT,c:/testCA.pfx@export ws,VALIDATE,ON where c:/testCA.pfx is the location and name of the certificate and export is the passphrase. • Send the following commands to set a common name for server 1 and server 2: ws, .SERVER_CN1,xxxxxxxxxx ws, .SERVER_CN2,xxxxxxxxxx where xxxxxxxxxx can be a value from 0 to 64 characters. • Send the following command to make sure your values match those used by the access point: wt,[variable name] All variables are returned with the exception of EAP_PASS, which always returns "****" if configured, and CA_CERT, which transmits the name of the last certificate authority successfully installed. An additional read-only variable for the supplicant state, called STATE, is also returned. • You may need to send the following command several times for the wireless station to connect: ws,ACTIVE,1 PB50 and PB51 Mobile Printer User Guide 39