Intermec PB50 PB50 and PB51 Mobile Printer User Guide - Page 76
Restarting the Mobile Printer
View all Intermec PB50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Chapter 3 - Troubleshooting and Maintaining the Mobile Printer To start Dump mode from Ready mode with IPL • Press and hold the Feed and Standby buttons until the printer starts feeding out media. The printer feeds several labels (or inches of media), prints the test labels, and then starts Dump mode. To stop Dump mode • Press the Feed button. Restarting the Mobile Printer You rarely need to cold boot the printer unless you are upgrading the firmware. If your printer occasionally locks up, you will want to cold boot it. A cold boot restarts the 802.11 wireless radio and clears the working memory. Note: The Setup menu is not affected by a cold boot. Your printer retains all of your configuration settings after the printer powers back up. To restart the printer 1 Disconnect the printer from power if externally powered. 2 Remove the battery from the printer for at least one second. 3 Insert the battery back into the printer. 4 Reconnect external power if your printer is externally powered. 64 PB50 and PB51 Mobile Printer User Guide