Intermec PB50 PB50 and PB51 Mobile Printer User Guide - Page 71
Possible Printer Error Icons and Messages - troubleshoot
View all Intermec PB50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Chapter 3 - Troubleshooting and Maintaining the Mobile Printer Possible Printer Error Icons and Messages Error Icon Error Message Description Pause The print job is paused. Paper out (IPL) The printer is out of paper. Load a new roll of Out of Paper (Fingerprint) media. For help, see "Loading Media" on page 14. Testfeed not done The printer did not perform a testfeed before it printed out test labels. It is important to perform a testfeed because it calibrates the printer sensors. To perform a testfeed: • Press the Feed button for more than 2 seconds (Fingerprint or ESC/P) • Open and close the media door, then press the Feed button (IPL) Printhead hot The printhead is overheated and needs to ' cool down. In IPL, wait for printing to resume automatically. In Fingerprint and ESC/P, your print job is lost. Upgrading The printer is loading new firmware. LSS too high LSS too low These errors can occur when you run a test feed without any media installed, or if you have incorrect media settings. Load the printer with media (see "Loading Media" on page 14), run Test mode (see "Understanding Extended Test Mode" on page 25), and select the appropriate media type. IP configuration The printer does not have a network IP error address. Wait for the printer to acquire an IP address before continuing. IP link error The printer does not have a network connection. PB50 and PB51 Mobile Printer User Guide 59