Intermec PB50 PB50 and PB51 Mobile Printer User Guide - Page 46
Setting Up 802.11 Radio Communications, Printer Tasks, Wireless Setup Wizard
View all Intermec PB50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Chapter 2 - Configuring the Mobile Printer 3 Scan the bar code labels with the Bluetooth scanner. Icon Description The Bluetooth radio is on and the printer is not connected to a serial cable. The Bluetooth radio is off. The Bluetooth radio turns off when you connect a serial cable. Setting Up 802.11 Radio Communications The printer can have an internal 802.11 b/g radio to transfer and receive data using wireless communications. This manual assumes that you have already set up your wireless communications network, including at least one access point. The following procedures include information on setting up wireless security for IPL and Fingerprint. The printer supports these authentication modes: none, WEP, WPA Personal and Enterprise mode (802.1x authentication), WPA2 Personal and Enterprise mode (802.1x authentication). Note: WPA and WPA2 Enterprise mode currently support PEAP, TTLS, and LEAP. For LEAP authentication, the printer supports Open EAP, but does not support Network EAP. To connect the printer to your wireless network, you need these items: • Serial cable (P/N 075497-001) • Host PC running Windows or Linux • A communications application, such as Printset or HyperTerminal To set up the printer for wireless communications using PrintSet 1 Connect the 8-pin circular DIN connector to the serial port on the printer. Connect the other end of the serial cable to a serial port on your PC. 2 On your PC, start PrintSet. 3 Select your printer from the My Printers list. 4 In the Printer Tasks list, click Wireless Setup Wizard. If you are prompted for the administrator username and password, type them and click Next. 34 PB50 and PB51 Mobile Printer User Guide