Intermec PX4i Intermec Direct Protocol 8.60 Programmer's Reference Manual - Page 40
Barfont, On | Barfont, Off[, <nexp>], On | Bf, Pp 100, 100:an 7:dir 4:barset Code39
View all Intermec PX4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Chapter 3-Label Design enables printing of bar code interpretation (default: OFF) All parameters reset to default by PRINTFEED (PF) Bar code interpretation printing can also be enabled or disabled using these instructions: BARFONT ↔ON | BARFONT↔OFF[,] BF ↔ON | BF↔OFF[,] By default, bar code interpretation is disabled. When printing EAN/UPC codes, the trailing parameter 0 can be specified to disable the printing of guard bars. BARFONT OFF or BARFONT OFF,1 returns the settings to the default. Summary To create a bar code field, the following formatting instructions must be given (in most cases default values may substitute missing parameters). Input data and printing instructions are explained in Chapters 3.9 and 4.2 respectively. Purpose Instruction Default Remarks X/Y Position PP (PRPOS) Alignment AN (ALIGN) Direction DIR Bar Code Select BARSET Interpretation BF...ON 0/0 1 1 see above Off Number of dots Select ALIGN 1-9 Select DIR 1-4 Can be replaced by BT, BH, BR, BM Can be omitted Example: PP 100,100:AN 7:DIR 4:BARSET "CODE39",2,1,3,120: BF #2,"Swiss 721 BT",5,1,1 ON ↵ 32 Intermec Direct Protocol v.8.60-Programmer's Reference Manual