Intermec PX4i Intermec Direct Protocol 8.60 Programmer's Reference Manual - Page 44
Line Field, Specify Size of the Line, Summary
View all Intermec PX4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Chapter 3-Label Design 3.7 Line Field A line can be printed in right angles along or across the media path according to the print direction. In addition to the general formatting instructions PRPOS, ALIGN, and DIR, a line field is specified by a single instruction. Specify Size of the Line The size of the line is specified in regard of length and line weight (thickness). PRLINE | PL , No default values. is the line length in dots along the selected direction. is the line weight in dots. Summary To create a line field, the following formatting instructions must be given (in most cases default values may substitute missing parameters). Printing instructions are explained in Chapter 4.2. Purpose X/Y Position Alignment Direction Line size Instruction PP (PRPOS) AN (ALIGN) DIR PL (PRLINE) Default 0/0 1 1 n.a. Remarks Number of dots Select ALIGN 1-9 Select DIR 1-4 Length and thickness (dots) Example: PP 100,100:AN 1:DIR 4:PL 200,10 ↵ 36 Intermec Direct Protocol v.8.60-Programmer's Reference Manual