Invacare 9XT Owners Manual - Page 41

Adjusting Footplate Height, Spring Button Height,

Get Invacare 9XT PDF manuals and user guides View all Invacare 9XT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

5.2 Adjusting Footplate Height 5 FRONT RIGGINGS Spring Button Height  This procedure applies to the swingaway front riggings and swingaway elevating legrest. Front Rigging Support 1. Remove the front rigging assembly. Refer to Installing/Removing Front Riggings on page 39.  Lay the front rigging assembly on a flat surface to simplify this procedure. 2. Pull the cam lock lever up to unlocked position.  The elevating legrest has two sets of release buttons, one set above the other. Each set will be visible one at a time allowing finer footplate height adjustment. Adjustment Holes Cam Lock Lever Release Button Footplate Assembly 3. Push in the release buttons and reposition the footplate assembly to the desired height. 4. Ensure that the release buttons fully protrude from holes on both sides of the front rigging support.  Swingaway footrest shown. 5. Rotate cam lock lever down to locked position. 6. Repeat this procedure for the other footplate, if necessary. FIGURE 2 Spring Button Height 7. Reinstall the swingaway front rigging assembly. Refer to Installing/Removing Front Riggings on page 39. Part No. 1056953 41 Invacare® 9000 Series Wheelchair

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
5
FRONT RIGGINGS
Part No. 1056953
41
Invacare® 9000 Series Wheelchair
5.2
Adjusting Footplate Height
Spring Button Height
1.
Remove the front rigging assembly. Refer to Installing/Removing
Front Riggings
on page 39.
2.
Pull the cam lock lever up to unlocked position.
3.
Push in the release buttons and reposition the footplate assembly
to the desired height.
4.
Ensure that the release buttons fully protrude from holes on both
sides of the front rigging support.
5.
Rotate cam lock lever down to locked position.
6.
Repeat this procedure for the other footplate, if necessary.
FIGURE 2
Spring Button Height
7.
Reinstall the swingaway front rigging assembly. Refer to Installing/Removing Front Riggings
on page 39.
This procedure applies to the swingaway front
riggings and swingaway elevating legrest.
Lay the front rigging assembly on a flat surface to
simplify this procedure.
The elevating legrest has two sets of release
buttons, one set above the other. Each set will be
visible one at a time allowing finer footplate height
adjustment.
Front Rigging Support
Release Button
Footplate
Assembly
Cam Lock Lever
Adjustment
Holes
Swingaway footrest shown.