Invacare 9XT Owners Manual - Page 85
Options
View all Invacare 9XT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
2. The telescoping I.V. rod/O2 holders clean easily with any household glass type cleaner. 3. After the cleaning solution has dried, it is safe for the user to re-occupy the wheelchair. 12 OPTIONS 12.2 Installing Crutch and Cane Carrier ƽ WARNING Check base weekly to ensure proper placement. When loading the crutch/cane carrier, ensure items are securely placed into the base. Also ensure that there is no interference with folding the wheelchair, the rear wheels, or the swing-back arms. Strap MUST be securely fastened while carrying items. NEVER insert or remove items while wheelchair is moving. 1. Slide the clamp with the base attached over the end of the step tube of the wheelchair. Ensure the base is towards the inside of the wheelchair. 2. Position the base parallel to the step tube. Strap ƽ CAUTION Base should be parallel to step tube to avoid bending spokes when folding the wheelchair. 3. Securely tighten the locknut that secures the base to the step tube of the wheelchair. 4. Remove the upper back upholstery screw and washer. 5. Align the strap with the back upholstery screw mounting hole. 6. Reinstall the back upholstery screw and washer and secure the strap to the wheelchair. 7. The base cleans easily with any chrome or glass cleaner. The strap can be cleaned with mild soap and water. Base Step Tube Clamp Locknut FIGURE 2 Installing Crutch and Cane Carrier Part No. 1056953 85 Invacare® 9000 Series Wheelchair