Invacare 9XT Owners Manual - Page 82

Installing I.V. Rod Support Tube, Adjusting I.V. Rod,

Get Invacare 9XT PDF manuals and user guides View all Invacare 9XT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 82 highlights

11 RECLINER Installing I.V. Rod Support Tube  The I.V. rod holder MUST already be mounted to the side frame of the wheelchair. 1. Insert the I.V. rod support tube into the rear cylinder of the I.V. rod holder.  When installing the I.V. rod support tube, ensure the adjustment knob is pointing out away from the wheelchair. 2. Turn the I.V. rod support tube until the holes in the I.V. rod support tube align with the holes in the rear cylinder of the I.V. rod holder. 3. Insert mounting screw through rear cylinder, large nylon washer, small nylon washer, steel washer, and into locknut. Securely tighten.  The large nylon washer MUST be inserted into hole and pressed in so that it is flush with outside surface of rear cylinder. 4. Reinstall the rear wheel from the wheelchair. Refer to Removing/Installing Rear Wheels on page 77. 5. Adjust I.V. rod to desired height. Refer to Adjusting I.V. Rod on page 82. Adjusting I.V. Rod 1. Loosen adjustment knob. 2. Adjust I.V. Rod to desired height. 3. Securely tighten adjustment knob. Invacare® 9000 Series Wheelchair 82  Attaching hardware enlarged 3X scale for clarity. Locknut Steel Washer Small Nylon Washer Large Nylon Washer Rear Cylinder Mounting Screw I.V. Rod Adjustment Knob I.V. Rod Support Tube I.V. Rod Holder FIGURE 13 Installing I.V. Rod Support Tube - Adjusting I.V. Rod Part No. 1056953

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
11
RECLINER
Invacare® 9000 Series Wheelchair
82
Part No. 1056953
Installing I.V. Rod Support Tube
1.
Insert the I.V. rod support tube into the rear cylinder of the I.V. rod
holder.
2.
Turn the I.V. rod support tube until the holes in the I.V. rod support
tube align with the holes in the rear cylinder of the I.V. rod holder.
3.
Insert mounting screw through rear cylinder, large nylon washer,
small nylon washer, steel washer, and into locknut. Securely tighten.
4.
Reinstall the rear wheel from the wheelchair. Refer to
Removing/Installing Rear Wheels
on page 77.
5.
Adjust I.V. rod to desired height. Refer to Adjusting I.V. Rod
on
page 82.
Adjusting I.V. Rod
1.
Loosen adjustment knob.
2.
Adjust I.V. Rod to desired height.
3.
Securely tighten adjustment knob.
FIGURE 13
Installing I.V. Rod Support Tube - Adjusting I.V.
Rod
The I.V. rod holder MUST already be mounted
to the side frame of the wheelchair.
When installing the I.V. rod support tube, ensure
the adjustment knob is pointing out away from the
wheelchair.
The large nylon washer MUST be inserted into
hole and pressed in so that it is flush with outside
surface of rear cylinder.
Adjustment
Knob
Locknut
Steel
Washer
Small Nylon
Washer
Large Nylon
Washer
Rear
Cylinder
Mounting Screw
I.V. Rod
Holder
I.V. Rod
Support
Tube
I.V. Rod
Attaching
hardware enlarged
3X scale for
clarity.